Silica Sand is one of the most common varieties of sand found in the world. Silica sand is used in industrial processing, to make create mould and castings, glass, as fill & other industries.
Sand is the general term for broken down granules of minerals or rocks, technically between about one-sixteenth of a millimetre to two millimetres in diameter, falling between silt and gravel in the spectrum of sizes.
There are many varieties of sand in the world, each with their own unique composition and qualities. Stallion Energy Pvt. Ltd. is a regular supplier of Silica Sand for the various industrial applications such as Foundry, Glass, Refectory, Iron & Steel, Cement, Fertilizer, Silicon Carbide & other Abrasives, Chemical, Asbestos Products, Insecticide, Electrode, Paint, Rubber, Water Filtration industries as per their requirement & specifications of grade.
1. FOUNDRY INDUSTRY :
|
GRADE |
FRACTUIB RETAUBED IB U.S SIEVE(m) |
%MINIMUM |
|
850/425 |
850 : 600 and 425 |
60 |
|
600/300 |
600 / 425 and 300 |
60 |
|
425/212 |
425 / 300 and 212 |
60 |
|
300/150 |
300 : 212 and 150 |
60 |
|
212/106 |
212 : 150 and 106 |
60 |
|
150/75 |
150 : 106 and 75 |
60 |
|
850/300 |
850 : 600 : 425 and 300 |
60 |
|
600/212 |
600 : 425 : 300 and 212 |
60 |
|
425/150 |
425 : 300 : 212 and 150 |
60 |
|
300/106 |
300 : 212 : 150 and 106 |
60 |
|
212/75 |
212 : 150 : 106 and 75 |
60 |
2. GLASS INDUSTRY :
|
SR NO |
CHARACTERISTICS |
REQUIREMENT AS PER IS – 488 (1980) |
STALLION
RESULT
|
|||
|
Special |
Grade I |
Grade II |
Grade III |
|||
|
1 |
SILICA ( AS SIO2) % BY MASS (MIN) |
99 |
98.5 |
98 |
97 |
99 |
|
2 |
IRON OXIDE (AS FE203) % BY MASS (MAX) |
0.020 |
0.04 |
0.06 |
0.10 |
0.029 |
|
3 |
ALUMINIUM (AS AL2O3) % BY MASS (MAX) |
* |
* |
* |
1.5 |
0.51 |
|
4 |
TITANIUM DIOXIDE (AS TIO2) % BY MASS (MAX) |
0.10 |
0.03 |
|||
|
5 |
LOSS OF IGNITION |
0.50 |
0.09 |
|||
|
SR. NO. |
PARTICULAR |
PERCENTAGE BY WEIGHTAS PER IS-488 |
STALLION RESULT |
|
1 |
RETAINED ON 1 MM SIEVES |
NILL |
NILL |
|
2 |
RETAINED ON 600 M. IS SIEVES (MAX) |
1.0 |
0.89 |
|
3 |
PASSING THROUGH 600 M. IS SIEVES BUT RETAINED IN 300 M. IS SIEVES(MAX) |
50.0 |
49.07 |
|
4 |
PASSING THORUGH 124 M. IS SIEVES(MAX) |
5 |
4 |
STALLION ENERGY’S Clinker is lumps or nodules, usually 3-25 mm in diameter, produced by sintering limestone and alumino-silicate during the cement kiln stage.
Clinker is ground (usually with the addition of a little gypsum, that is, calcium sulfate dihydrate) to become Portland cement. It may also be combined with other active ingredients or chemical admixtures to produce.
Clinker, if stored in dry conditions, can be kept for several months without appreciable loss of quality. Because of this, and because it can easily be handled by ordinary mineral handling equipment, Clinker is also shipped to grinding plants in areas where cement-making raw materials are not available.
Application
· OPC & PPC Cement Production
Typical Properties
|
Physical Requirements |
Laboratort Test Result |
Unit |
|
Loss on ignition (LOI) |
0.30 |
% |
|
Silica (SiO2) |
21.56 |
% |
|
Aluminium Oxide (Al2O3) |
5.36 |
% |
|
Iron Oxide (Fe2O3) |
4.00 |
% |
|
Calcium Oxide (CaO) |
64.65 |
% |
|
Magnecium Oxide(MgO) |
1.22 |
% |
|
Sulphuric Anhydrus (SO3) |
0.48 |
% |
|
Insoluble Residue (IR) |
0.26 |
% |
|
SM |
2.30 |
|
|
MA |
1.34 |
|
|
LSF |
0.93 |
|
|
C3S |
52.09 |
|
|
C2S |
22.60 |
|
|
C3A |
7.44 |
|
|
C4AF |
12.16 |
|
|
Mechanical Testing |
Laboratory Test Result |
Unit |
|
SOUNDNESS TEST Le-Chatelier Expanson Auto Clave |
Nil 0.09 |
mm % |
|
COMPRESSIVE STRENGTH 3 Days 7 Days 28 Days |
48 63 Awaited |
MPa MPa MPa |
Limestone is a sedimentary rock consisting of mainly calcium carbonate (Calcite - CaCO3). We are one of the leading suppliers and traders of finest quality LIMESTONE MINERAL. We are excavating & extracting limestone using our own latest modern machinery from trusted mine location in our province. These lime stones are known for their chemical composition (CaCO3: more than 52%). Our Limestone can be used to produce Portland cement, fertilizer, as filler in paper, plastic, and paint, remove impurities in steel making, petrochemicals, pesticide, glass etc.”
We are offering natural Gypsum Of Iran And Iman Origin with the size of 0 -50 mm and 50 - 250 mm. Our product purity is up to 95%.
Applications
· Cement production
· Plaster Of Paris
· Glass Manufacturing
· Fertilizer and Soil Conditioners
· Production of Gypsum Boards
· Surgical ,Medicinal products
TYPICAL CHEMICAL RESULT
| Characteristic | Grinded | Result | Protocol |
| Free Water | % | Less than 0.1 | ASTM C-471 |
| Combine Water | % | 15.10 | ASTM C-471 |
| Silica as SiO2 | % | 0.45 | ASTM C-471 |
| Alumina as Al2O3 | % | 0.19 | ASTM C-471 |
| Iron as Fe2O3 | % | 0.04 | ASTM C-471 |
| Calcium as CaO | % | 33.38 | ASTM C-471 |
| Magnesium as MgO | % | 1.39 | ASTM C-471 |
| Gypsum (CaSO4.2H2O) | % | 72.15 | ASTM C-471 |
| Anhydrite CaSO4 | % | 21.54 | ASTM C-471 |
| Sulphur Trioxide as SO3 | % | 46.22 | ASTM C-471 |
| Purity | % | 93.69 | - |
CALCIUM CARBONATE (CaCo3)
We are offering a wide array of premium quality coated/treated and uncoated/untreated Calcium Carbonate to our clients of Vietnam & India origin. The quality of the Calcium Carbonate that we offer is very well known for the purity as well as the ease with which it can be used in multiple applications.
Calcium Carbonate is produced by surface coating the Precipitated Calcium Carbonate slurry with Fatty Acids (Stearic Acid) and Titnate Coupling Agent then filtering and drying of the coated PCC slurry to produce CACO3 powder. The particle size, as well as the crystal form is precisely controlled by temperature, concentration of reactants and other process parameters.
DOWNLOAD BROCHURE
Features
- Highly effective
- Precisely formulated
- Accurate composition
Applications
- Plastic industry & Rubber industry
- Pharmaceuticals
- Cosmetics
- Paints & Printing ink
- Sealants and mastics
Technical Specifications
|
Sr. No |
Particulars |
SEPL -10M |
SEPL -20M |
SEPL-30M |
|
1 |
Brightness |
98+/- 1% |
98+/- 1% |
98+/- 1% |
|
2 |
PH of 10 % Sat. Solution |
9.2 |
9.2 |
9.2 |
|
3 |
Oil Absorption |
23+/- 2% |
23+/- 2% |
23+/- 2% |
|
4 |
Particle Size Distribution D-97 |
<10.0 |
<20.0 |
<30.0 |
|
5 |
BD ( Tapped) |
0.90 g/ml +/- 0.05 |
0.95 g/ml +/- 0.05 |
1.15 g/ml +/- 0.05 |
|
6 |
MOHS Hardness |
3 |
3 |
3 |
|
7 |
Sp. Gr. |
2.7 |
2.7 |
2.7 |
Chemical Analysis
|
Sr.no |
Particulars |
Results |
|
1 |
CaCo3 |
97+/-1% (MAX) |
|
2 |
MgO |
1.0% (MAX) |
|
3 |
Silica (Sio2) |
0.2 % (MAX) |
|
4 |
Iron Oxide (Fe2O3) |
0.20% (MAX) |
|
5 |
Aluminum Oxide (Al2O3) |
0.20 % (MAX) |
Packaging
CC is packed in 50/1000 kg Inner/linner HDPE Bags. It can also be customized as per individual requirements.
"Biodiesel" is a green & clean fuel derived from trans-esterification or acid esterification of vegetable oil or animal fat (tallow). It is a biofuel produced from various feedstock including vegetable oils such as oilseed, rapeseed and soya bean, animal fats or algae.
Biofuel initiatives in India have gained momentum with the national biofuel policy targeting 20% blending of both petrol and diesel by 2017.
BENEFITS: Biodiesel is a clean burning fuel, which has not any toxic emissions like mineral diesel. It doesn’t require modifications to a diesel engine to be used. It reduce exhaust emissions compared to petroleum diesel fuel, has lower toxicity compared to petroleum diesel fuel and safer to handle compared to petroleum diesel fuel. It is bio-degradable and is governed by ASTM D 6751 quality parameters.
Biodiesel helps reduce greenhouse gas emissions (GHGs) because it comes from animal or plant biomass with a lifecycle of a few years. On the other hand, petroleum diesel is a fossil fuel that releases into the atmosphere carbon that has been tied-up for hundreds of millions of years, and all of it adds to GHGs. Fossil fuels also release more tailpipe emissions than does biodiesel.
DIESEL ENGINES: There is no need to convert any diesel operated engine to use biodiesel. No modifications or alterations are required to utilize biodiesel. The consumer can use biodiesel as and when he desires.
One can use both the varieties of diesel at any point. One can always keep one form of diesel as a backup fuel. Any diesel engine can utilize any of the mentioned diesel models. Biodiesel-powered engines have been shown to deliver similar torque and horsepower as diesel-powered engines. Biodiesel has a higher cetane rating, which can improve starting and reduce smoke emissions.
VEHICLES: Biodiesel and diesel fuels burn quite similarly in diesel engines. In fact, biodiesel has some specific advantages, such as better lubricity, reduced engine and fuel pump wear and tear and, quite often, a longer engine life.
STORAGE: In general, the standard storage and handling procedures used for petroleum diesel can be used for biodiesel. The fuel should be stored in a clean, dry and dark environment. Acceptable storage tank materials include aluminum, steel, fluorinated polyethylene, fluorinated polypropylene and teflon. Copper, brass, lead, tin and zinc should be avoided.
"China Clay" also known as Kaolinite and Kaolin.
It is mainly used in Ceramic Industry in manufacturing of tiles. Beside this also used in Paint, Paper, Rubber, Fiber Glass, Detergent, Pesticides Industries.
“Stallion Energy Pvt. Ltd.”, Rajkot, Guj. is Processor, Manufacturer, Exporter, Importer, Supplier, has made foray in high growth sectors like Mineral Products, Coal, Coke & Petroleum Products viz. China Clay, Calcined Sand, Silica Fume, Dolomite Powder, Calcium Carbonate, Activated Carbon, Furnace Oil, LDO, Biodiesel, Met Coke, Anthracite Coal, Pet Coke, Steam Coal, Wood Charcoal. We are into this business since 1996.
We are leading supplier of CHINA CLAY to many medium and large industries. Thus, it will be our pleasure to Offer you China Clay as per your requirement with affordable price.
|
PHYSICAL PROPERTIES |
RESULT |
|
RESIDUE (200 #) |
0.34 % |
|
MOISTURE % |
5.10 % |
|
LOSS ON INGNITION % |
13.45 |
|
SHRINKAGE % |
4.80 |
|
L° |
94.85 |
|
A° |
0.21 |
|
B° |
4.29 |
|
WHITENESS |
88.9 |
|
TEMPERATURE °C |
1206/1196 |
|
CYCLE MIN. |
60 |
|
MIX PROPERTIES |
RESULT |
|
MIX L O I % |
5.71 |
|
MIX SHRINKAGE % |
10.00 |
|
MIX L° |
83.59 |
|
MIX A° |
0.85 |
|
MIX B° |
6.13 |
|
MIX WHITENESS |
63.5 |
“Calcined Sand & Calcined Powder” is mainly used in Investment Casting Industries.
We are leading supplier of CALCINED SAND to many medium and large industries. Thus, it will be our pleasure to Offer you Calcined Sand & Powder as per your requirement with affordable price.
“Stallion Energy Pvt. Ltd.”, Rajkot, Guj. is Processor, Manufacturer, Exporter, Importer, Supplier, has made foray in high growth sectors like Mineral Products, Coal, Coke & Petroleum Products viz. China Clay, Calcined Sand, Silica Fume, Dolomite Powder, Calcium Carbonate, Activated Carbon, Furnace Oil, LDO, Biodiesel, Met Coke, Anthracite Coal, Pet Coke, Steam Coal, Wood Charcoal. We are into this business since 1996.
SIEVE REPORT
|
16/30 |
30/80 |
50/80 |
200 MESH CALCINED POWDER |
||||||||
|
U.S. SIEVE |
RANGE |
ACTUAL |
U.S. SIEVE |
RANGE |
ACTUAL |
U.S. SIEVE |
RANGE |
ACTUAL |
U.S. SIEVE |
RANGE |
ACTUAL |
|
+16 |
0-10 % |
9 % |
+30 |
0-5 % |
1 % |
+45 |
0-5 % |
3 % |
+100 |
0-5 % |
0.5 % |
|
+18 |
45-65 % |
63 % |
+45 |
40-50 % |
50 % |
+60 |
90-95 % |
95 % |
-100+200 |
5-10 % |
5.01 % |
|
+22 |
+60 |
30-50 % |
44 % |
+80 |
-200+300 |
10-20 % |
19.87 % |
||||
|
+25 |
+80 |
5-15 % |
4 % |
+100 |
0-5 % |
2 % |
-300 |
BALANCE |
74.62 % |
||
|
+30 |
10-20 % |
15 % |
-80 |
0-5 % |
1 % |
|
|
|
|
|
|
|
+35 |
10-20 % |
12 % |
|
|
|
|
|
| |||